1000KVA Cummins KTA38-G5 Engine Powered Generator Set 3 Phase Industrial Generator

 

1000KVA Cummins KTA38-G5 Engine Powered Generator Set 3 Phase Industrial Generator

 

Features

1. Universal design and manufacture.
2. Most widely used around the world.
3. With most service terminals.
4. Engineers are familiar with Cummins powered gensets.
5. You could find spare-parts very easy.

Genset Specifications:

 

Genset Model	SCF1000
Prime Power	800KW/1000KVA
Rated Voltage	400/230V
Frequency	50Hz
Power Factor	0.8(lagging)
Dimension (L×W×H) (mm)	4200×1800×2300
Genset weight (kg)	7900

 

 

 

 

 

 

 

 

 

Engine Specifications:

 

Diesel Engine
Brand	CCEC Cummins
Model	KTA38-G5
Number of Cylinders	12
Rotating Speed	1500RPM
Cylinder Arrangement	60º Vee form
Cycle	Four stroke
Aspiration	Turbocharged after water-cooled
Bore×Stroke(mm)	159 x 159
Displacement(L)	37.8
Compression Ratio	15.5:1
Speed Governor	EFC speed governor
Cooling System	Water-cooled
Speed Stability (%)	≤5%
Total Lubrication System Capacity (L)	129
Fuel Consumption at 100% Load	196g/kwh
Starting Method	DC 24V Electrical starting

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Alternator Specifications:

 

Alternator
Brand	Faraday
Model	FD6C1-4
Number of Phase	3
Connecting Type	3 Phase and 4 Wires
Number of Bearing	1
Protection Grade	IP23
Altitude	≤1000m
Exciter Type	Brushless ,Self-excited, AVR automatic voltage regulation
Insulation Class	H
Telephone Influence Factor (TIF)	≤50
THF	≤2%
Voltage Regulation, Steady State	≤±1%
Transient State Voltage	≤-15%~+20%

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Control System

Standard control panel is the basic configure for normally operation and usage. The advantages of this panel are easy operation, aomprehensive function and reliable protection and so on. There are indicating gauges, lamps, transfer switches and emergency stop button, etc. The control panel wil stop the whole generator set and alarm as well when malfunction appears.
 

SCOPE OF SUPPLY

 

1. DIESEL ENGINE

1.1 Engine which includes wet type cylinder, direct injection combustion chamber, exhaust turbocharger, water cooling, electronic governor, etc.

1.2 Fuel system, which includes, fuel pump, strainers or filters, etc.

1.3 Air intake and exhaust system, which includes air filter, exhaust silencer, bellow, all intake and exhaust piping, cablings, instruments, valves and settings, etc.

1.4 Cooling system, which includes radiator with water level alarm and indicator, thermostatic switch, thermostatic heater, engine shaft mounted fan, all interconnecting piping, cablings, instruments, valves and settings, etc.

1.5 Lubricating system includes pumps, oil sumps, oil strainers and filters, all interconnecting piping, instruments, valves and settings, etc.

1.6 Starting system, which includes 2 sets of batteries, a set of AC charger, and interconnecting piping, cablings, instrument, valves and settings, etc.

2. AC SYNCHRONOUS GENERATOR

2.1 Generator, which includes exciter, rectifier, AVR, shaft mounted fan if required.

2.2 All interconnecting piping, cablings, instruments, valves and settings, etc.

3. COUPLINGS AND GUARD

3.1 Coupling

3.2 Coupling Guard

4. CONTROL PANEL

4.1 Local automatic control panel

5. BASEPLATE

5.1 Common base plate

6. DOCUMENTS

6.1 Generator Set Installation Manual

6.2 Generator Set Operation and Maintenance Manual

6.3 Generator Set Control Panel Manual

6.4 Engine Manual and Quality File

6.5 Alternator Manual and Quality File

6.6 Factory Acceptant Test Report

6.7 Relative Drawings and Diagrams

 

Factory Overview